FormBond Veneer Adhesive

Price: $14.95

Item Number: FormBond

Quantity:

FormBond Adhesive (13 oz. can)

FormBond is a high strength, high temperature, low VOC solvent-based spray adhesive for industrial use in a variety of applications. It contains no CFCs, is waterproof and dries clear.

Directions for use

Surface must be clean of dust and dirt and substrate should be properly conditioned. Prior to use a small test patch should be sprayed to evaluate substrate compatibility. This product may degrade some thin plastics and films.

Apply a uniform coat of adhesive evenly across the surface. Spray both surfaces to be bonded; once surface vertically and the other surface horizontal. Allow adhesive to tack up until no adhesive transfers to finger when touched (approximately 2 to 3 minutes).

Clean up: Use Westech's WT-AR Adhesive Remover or other petroleum solvents.

Technical Data

Contains NO chlorinated solvents
VOC Range: <55% by weight
Color: White when sprayed, dries clear
Solvent: Cyclohexane / Acetone
Boiling Point: 140° F
Shelf Life: 12 months (agitate before use)
Optimum Spray Temperature: 60° F to 80° F
Storage: Keep from freezing
Flammable: Yes
Service Temperature: -30° F to 220° F

Performance Features

Low VOC levels for use in any location
Formulated for rapid application
Bond can withstand heat and humidity
Applies easily and adheres to various substrates

FormBond can provide a fast tacking, strong, permanent and waterproof bond

High Tensile Strength
Ample Peel Strength
High Temperature Resistance Level of Bonding
High solids Web Pattern Formulation for Extended Coverage.