Monster Bond Gap Filling Cabinetmaker's Glue (1gal.)

Price: $24.95

Item Number: MBG-ARG-GF

Quantity:

Monster Bond Gap Filling Cabinetmaker's Glue

An extremely high quality PVA adhesive specifically formulated with special filler that will bridge slight gaps in woodworking joints and reduce bleed-through when pressing or clamping raw (un-backed) veneers that are thin and porous. The high solids content and and strength makes it the perfect choice for woodworking joinery.

	Easily chips off after it has dried, thus less scraping, sanding and clean-up is needed.
	Bonds stronger than the wood itself
	Not affected by finishes
	Moisture resistant

Directions:
Use only on freshly machined wood
Assure all surfaces to be glued are clean and dry
Joints should be true and pieces to be glued should be in intimate contact
Spread a thin consistent layer (6-9 wet mil) of adhesive on one surface and bring pieces together under pressure
Maximum closed assembly time: 15 minutes.
Clamp time: 3--45 minutes. Allow to cure 24 hours before machining

Advantages:

Good assembly time tolerance balanced with moderate set speed.
Good heat resistance.
Heavier bodied formula for superior adherence to joinery.
Tan colored glue line blends with a wide variety of species.
Best formula where gap filling glue is required.

Clean Up and Storage:
Cleans up easily with warm water while wet. A mild detergent can be added to aid clean up.
Post cure, remove excess adhesive by scraping or sanding.
Protect from freezing.
Store tightly closed at room temperature.

Specifications:
Color: Tan/Brown
Min Use Temperature: 45ºF
Shelf life in unopened container is 6 months at 70F.

MSDS available upon request