Frigidaire Front Load Washer Drain Pump

Posted on

5 Best Ways To Fix Frigidaire Front Load Washer Drain Pump

Frigidaire front load washer drain pump – You all know that when you turn on your washer, you can see the liquid level in the bottom of the tub. If the liquid level is low then you should call a plumber to fix the problem. If you are having the same problem then you must try these methods to fix it.

See also  Frigidaire Oven Door Locked (How to)

If you have a Frigidaire front load washer then you must be familiar with its drain pump. The drain pump of the Frigidaire front load washer is not working properly. It will make the water in the tub flow slowly and it will increase the washing time.

To fix this problem you can do the following methods:

See also  Frigidaire Dishwasher No Lights

1. Unplug the drain pump from the wall outlet.

2. Remove the cover of the drain pump.

3. Remove the drain pump.

4. Connect the drain hose.

5. Turn on the power.

6. Check whether the water is flowing into the tub.

7. Replace the drain pump.

8. Clean the drain pump.

See also  Frigidaire Gas Range Troubleshooting (How To Do It Right)

9. Connect the drain hose.

10. Turn on the power.


I hope that these methods will help you to solve the problem. I am sure that you will get the desired results and you will save a lot of time and money. If you are facing any kind of problems then you can contact professionals.

See also  How To Change Light Bulb Inside Frigidaire Microwave

Leave a Reply

Your email address will not be published. Required fields are marked *