GE Washer Disassembly Guide

Posted on

How To Do GE Washer Disassembly

GE washer disassembly guide – It might happen that you have an old washing machine and you want to sell it or you just want to keep it because it is a good gift for your parents. In this case, you need to know how to disassemble your old washing machine.

There is no harm in keeping the washing machine, but if you don’t know how to disassemble it, then it will be difficult for you to get a new one. So, let’s discuss the disassembling of your old washing machine.

Disassemble the washing machine first

The first thing that you need to do is to disassemble the washing machine. You can use a screwdriver to disassemble it. The best part is that you don’t have to take any risk; if you make a mistake you can repair it easily.

Remove the washer panel

After removing the screws, you will find a washer panel which will have a lock. So, remove the lock and pull the panel down. Remove the washer panel by pulling it towards the back.

See also  Whirlpool Top Load Washer Leaking Water From Bottom

Remove the washing machine’s front panel

Once you have removed the washer panel, you will find the front panel. Now, you will need to remove it by turning the knob and then you will find the top and bottom panels. Remove the top and bottom panels by lifting up and down.

Remove the door panels

Now, you will find the door panels. Now, you will need to remove the panel by lifting it up. There will be a screw in the middle of the panel and you will need to remove it.

See also  How to Remove Agitator on GE Washer?

Remove the drum

You will find the drum in the center of the washing machine. To remove the drum, you will need to lift it up and then you will need to remove the bolts from the bottom.

Remove the agitator

To remove the agitator, you will need to pull the lever. Now, you will need to remove the agitator.

See also  Samsung Front Load Washer Drain Pump

Remove the top panel

The top panel is the best part of the washing machine. To remove the top panel, you will need to push the button and pull it.

Remove the tub

Once you have removed the top panel, you will see the tub. Now, you will need to take the tub and remove the screws.

Conclusion

In conclusion, you will get your old washing machine disassembled in just 60 minutes or more. This is the best way to get rid of your old washing machine.

See also  How Does a Washing Machine Pump Work?

Leave a Reply

Your email address will not be published. Required fields are marked *