Hot Water Heater Not Heating (How to)

Posted on

How To Fix Hot Water Heater Not Heating

If you have been living in a house where hot water heater is not working, then I am sure you are tired of the situation. The situation is frustrating because you need to wait for the hot water every time you need a bath.

Hot water heater is one of the most important appliances of the house. It helps us to make the water at home warm and it also saves electricity.

Most of the people are using gas hot water heater, and the installation process is very simple. But some people are complaining about the heater not working properly and they need to replace it.

See also  How to Drain a Whirlpool Hot Water Heater?

The problem might be caused by many things. If the water is not flowing smoothly, then there is a problem with the thermostat. If the water flow is not smooth and it is coming with a lot of noise then the problem is with the valve.

If the thermostat is working fine and the water flow is smooth, then the problem is with the heater itself. The problem is not in the thermostat or in the valve but it is in the heater.

The problem can be fixed by following a few simple steps, which are discussed below.

Steps to Fix Hot Water Heater Not Heating

Checking the thermostat

If you are unable to fix the problem and you are getting a lot of hot water then you must check the thermostat. If you see the problem is not in the thermostat but in the water flow, then you must contact a professional.

See also  How to Replace a Thermocouple on a Water Heater

Changing the filter

If the filter is clogged, then the water flow is smooth but the temperature is not changing, then it is a clear sign of the problem. In this case, the filter needs to be changed.

Check the water flow

If you are facing a problem with the water flow and you are unable to find out the problem, then you must turn off the water and then try to check the pressure. If it is normal, then the problem is with the valve.

See also  How To Tell Age Of Whirlpool Water Heater?

Checking the thermostat

If you are still unable to find the problem, then you can change the thermostat. If you are getting the problem in the summer time, then you need to install the fan to make the room cool and if you are getting a problem in the winter, then you need to install the heater to make the room warm.

Conclusion

I hope you found this article informative and helpful. I have also shared some of the reasons why you might be getting a hot water heater problem.

See also  How To Turn on Whirlpool Water Heater?

If you are facing the problem and don’t know what to do, then you can contact our technician and we will fix the problem. We will provide you with the best services for your hot water heater.

FAQ

What’s the problem?

It could be a few things. First, check to see if the thermostat is set properly. If it’s set too high, the heater won’t heat the water.

Is there anything I can do to fix it?

If the heater is working properly, you may need to add more water to the tank.

What does this mean?

This means that the tank is full of water.

See also  How Do You Reset a Hot Water Heater?

Is there anything else I can do?

It may be time to change the filter. You may also want to clean the tank.

What can I do to prevent this from happening again?

Make sure that you replace the filter at least once every three months. You can also change the water in the tank to make sure that it’s clean.

Leave a Reply

Your email address will not be published.