3 Ways To Bypass Dryer Door Switch
Most of the times, when you use a dryer, you need to open the door of the dryer. There are some cases that you can’t open the door because of safety reasons, for instance, if you leave the dryer on while you are away then you can’t open the door because it will burn you.
To get the access to your dryer, you need to turn the knob and the dryer door will automatically open. The dryer door is usually connected to the wall socket and it is used to drain the water in the drum of the dryer.
But, there are some people who want to open the dryer door without turning the knob of the dryer. The main reason behind it is that the dryer is located in a very small area and if the dryer is on then it can cause some severe damage.
For those who don’t know how to bypass the dryer door, here are some simple and effective tips that will help you to open the dryer door without turning the knob.
How to open the dryer door without turning the knob
There are some tricks that will help you to open the door of the dryer without touching the knob. First of all, you need to know that there are two different types of the dryer, electric and gas. So, if you don’t know whether it is electric or gas then you can check it by looking at the back of the dryer.
1. Remove the washer from the dryer
If you want to open the dryer door without turning the knob, then you need to remove the washer from the dryer. You need to disconnect the power cord of the washer and you will see that it is an electric dryer.
2. Open the dryer door
Once you have removed the washer from the dryer, then you will be able to open the door of the dryer. If you can see the wire that is connected to the dryer, then you can easily see the red wires and the black wires.
3. Turn the red wires to the black wires
If you don’t know how to turn the red wires to the black wires, then you need to check the manual of the dryer. If you can’t find the manual then you can contact the manufacturer of the dryer to get the manual of the dryer.
4. Use a tool
If you don’t have any idea of turning the red wires to the black wires, then you can use a tool to do this task. You can use a screwdriver to do this.
Conclusion
I hope you found this post helpful and informative. If you have any questions regarding this post, feel free to comment below.