Bringing the Heat Back: Replacing the Heating Element in a Maytag Dryer
When your Maytag dryer stops producing heat, it may be time to change the heating element. Replacing the heating element in a Maytag dryer is a relatively simple task that can be completed in about an hour, depending on the model. With the right tools and a few helpful tips, you can get your dryer running again in no time.
Before you begin, make sure you have the proper tools and materials. You will need a Phillips head screwdriver, a 7/16 nut driver, a pair of needle nose pliers, and a new heating element for your Maytag dryer. You will also need a 1/4 nut driver if the new element has a larger terminal.
Once you have all the necessary tools, you can start the repair process. First, unplug the dryer and then remove the top of the dryer by loosening the screws on the back. Once the top is removed, you can access the heating element.
The heating element for a Maytag dryer is located inside the drum, near the back. You will need to use the 7/16 nut driver to remove the screws that hold the heating element in place. Be careful when removing these screws, as they can be difficult to remove. Once the screws are removed, you can then pull the heating element out of the dryer.
The next step is to disconnect the wires from the heating element. You will need to use the needle nose pliers to carefully remove the wires. Once the wires are removed, you can then remove the heating element and replace it with the new one. Make sure that the new element is securely in place and that the wires are connected properly.
Once the new heating element is in place, you can then secure it with the 7/16 nut driver. After the screws are tightened, you can then reattach the wires to the new element. Make sure all connections are secure before reassembling the dryer.
Now that the new heating element is in place, you can reassemble the dryer. First, reattach the top of the dryer and then plug it back in. Make sure that all of the screws are tightened and that all connections are secure. Once the dryer is reassembled, you can turn it on and test it out.
Replacing the heating element in a Maytag dryer is a fairly simple task that can be completed in about an hour. With the right tools and a few helpful tips, you can get your dryer running again in no time. Be sure to follow the steps outlined above and to double check all connections before reassembling the dryer.