Take the Heat Off: Replacing the Heating Element in Your Frigidaire Dryer
How To Change The Heating Element In A Frigidaire Dryer
If you have a Frigidaire dryer that is not heating properly, you may need to replace the heating element. The heating element is the part of the dryer that heats the air that passes through the drum. It is usually located near the back of the drum. Replacing the heating element is not a difficult job, but it does require safety precautions. Before you begin, make sure to unplug the dryer and allow it to cool.
Tools and Materials Needed:
? Phillips head screwdriver
? Flathead screwdriver
? Needle nose pliers
? New heating element
Step 1: Remove the back panel. The back panel is usually held in place by several screws. Use a Phillips head screwdriver to remove the screws and set them aside in a safe place.
Step 2: Disconnect the wires. Once the back panel is removed, you will be able to access the wiring. Disconnect the wires from the heating element using the needle nose pliers.
Step 3: Remove the heating element. Use a flathead screwdriver to remove the screws that hold the heating element in place. Once the screws are removed, you can carefully lift the heating element out of the dryer.
Step 4: Install the new heating element. Place the new heating element in the dryer and secure it with the screws.
Step 5: Reconnect the wires. Use the needle nose pliers to reconnect the wires to the new heating element.
Step 6: Replace the back panel. Once the wiring is connected, you can replace the back panel. Secure the panel with the screws you removed in step 1.
Step 7: Test the dryer. Plug the dryer in and turn it on. Test the dryer to make sure the heating element is working properly.
Replacing the heating element in a Frigidaire dryer is relatively easy. It is important to remember safety precautions when working with electrical components. Make sure to unplug the dryer and allow it to cool before you begin. If you are not comfortable with this repair, it is best to call a professional.