Connecting a Water Line to Your Whirlpool Refrigerator – A Step-by-Step Guide
How To Connect Whirlpool Refrigerator Water Line
Refrigerators that have an integrated ice maker or water dispenser require a water line to be connected to them. Whirlpool refrigerators are no exception. Fortunately, connecting a water line to a Whirlpool refrigerator is a relatively easy task, and can be done by most homeowners with some basic tools.
Start by turning off the water supply to the refrigerator. There is typically a shut off valve located under the sink or behind the refrigerator. Once the water supply is turned off, use a socket wrench to loosen the compression fitting on the supply line. Then, disconnect the supply line from the shut off valve.
Next, you will need to connect the water line to the refrigerator. The first step is to cut the water line to the correct length. The length of the line will depend on the distance from the shut off valve to the refrigerator. Once the line is cut to the correct length, use a compression fitting to connect one end of the line to the refrigerator. Make sure to use thread tape to ensure a tight seal.
Next, you will need to attach the other end of the water line to the shut off valve. First, use a socket wrench to loosen the compression fitting on the shut off valve. Then, attach the water line to the shut off valve using a compression fitting. Again, use thread tape to ensure a tight seal.
Once the water line is attached to the refrigerator and shut off valve, you can turn the water supply back on. Make sure to check for any leaks at the connections. If everything is secure and there are no leaks, you can proceed to the next step.
The last step is to install the water filter. Most Whirlpool refrigerators come with a built-in water filter. Depending on the model, the filter may be located inside the refrigerator or in the back of the unit. Follow the manufacturer?s instructions to install the filter.
Once the filter is installed, you can turn the water supply back on and check for any leaks at the connections. If there are no leaks, your Whirlpool refrigerator is now connected to the water supply. All that is left to do is to run the water line through the refrigerator and plug it into the ice maker or water dispenser.
Connecting a water line to a Whirlpool refrigerator is a relatively easy task and can be done by most homeowners with some basic tools. Just remember to turn off the water supply before starting, use thread tape to ensure a tight seal, and install the water filter according to the manufacturer?s instructions. Once the connections are secure, your refrigerator will be ready for use.