How to Fix a Thermocouple on a Water Heater?

Posted on
How to Fix a Thermocouple on a Water Heater?

How do you fix a thermocouple on a water heater? Is it a difficult process?

Well, the answer is yes and no. If you have a water heater and are having problems, then don’t worry as there are ways that you can easily fix it. You can make it simple by using the following 3 best tips.

For visual learner, check out video below for step by step tutorial by AMRE Supply Channel:

Remove the screws

This is the first step that you need to do and it will help you to easily remove the screws. Remove the screws one by one and then remove the old thermocouple from the heater.

Clean the thermocouple

After removing the old thermocouple, you should clean the surface of the thermocouple to avoid any damage. Don’t use too much water on the thermocouple; it should be cleaned with a damp cloth. This will ensure that it doesn’t dry up and get damaged.

See also  General Electric Water Heater Parts

Replace it

Now, after cleaning the thermocouple you need to put it back in the heater and replace the screws. Make sure that you don’t screw it too tight as it can cause damage.

FAQs About How to Fix a Thermocouple on a Water Heater

How do you change thermocouple on a hot water heater?

The first step is to shut off the power to the water heater. Next, turn off the cold water supply to the water heater. You can usually do this by turning a valve on the pipe that connects to the cold water line. Next, you need to remove any insulation around the pipes and disconnect any wires running to or from the hot water heater. You will then need to find where your new thermocouple is located.

See also  How To Turn on Whirlpool Water Heater?

How does a thermocouple work in a water heater?

A thermocouple is a device that measures temperature. It is made up of two wires of different metals, which produce an electric current when they are at different temperatures. A controller monitors the thermocouple’s output and adjusts the flow of gas to the burner until it reaches the desired temperature.

What does the thermocouple do on my water heater?

As answered before, the thermocouple is a device that measures the temperature of the water in your water heater. It will shut off the heating element when it reaches a certain temperature to prevent overheating and damage to the tank.

See also  How To Clean A Thermocouple On A Water Heater

Can you fix a thermocouple?

Thermocouples are very delicate. They are made of two wires that are joined at the ends, which are then attached to an instrument. All in all, the thermocouple is not designed to be repaired if it breaks, but you can replace it with a new one if needed.

How do I know if the thermocouple is bad on my water heater?

If the water in your water heater is not getting hot, or if you notice that the temperature on your thermostat is not matching the temperature of the water, then a thermocouple could be bad.

See also  How to Drain a Whirlpool Hot Water Heater?

How much does it cost to replace a thermocouple on a water heater?

Thermocouples are generally not replaced on water heaters, but rather they are replaced as a set of two. The cost of a set of two thermocouples is generally around $30-$40. The average cost for a professional to replace a thermocouple on a water heater is around $50.

Are thermocouples easy to replace?

Thermocouples are not easy to replace. You should not attempt to replace a thermocouple unless you have experience in this type of repair. But if you want to learn by doing and willingly accept any risk, you can follow video instruction earlier.

See also  How to Replace a Thermocouple on a Water Heater


If you are facing any problem in your water heater, then don’t worry as these 3 best tips are the best ways to fix a thermocouple.

So, try them and if you still face any problem then don’t hesitate to contact a professional.

Leave a Reply

Your email address will not be published. Required fields are marked *