How To Fix Fridge Door Handle

Posted on

DIY Refrigerator Door Handle Replacement: A Simple Guide to Fixing a Broken Handle

How To Fix Fridge Door Handle

When the handle on your refrigerator door breaks, it can be a major inconvenience. Not only can it be difficult to open and close the door, but it can also cause the door to leak cold air, leading to higher energy bills and food spoilage. Fortunately, replacing a broken handle is a relatively straightforward process that you can do yourself with a few simple tools.

To begin, you will need a Phillips head screwdriver, a flat-head screwdriver, and a pair of needle-nose pliers. You will also need a replacement handle of the correct type for your refrigerator. Check the manufacturer?s website for the correct part number to ensure that the new handle will fit your fridge.

Once you have acquired the necessary tools and replacement parts, you can begin the process of fixing the fridge door handle. Begin by unplugging the refrigerator from the wall. Then, open the door and locate the screws that hold the handle in place. Depending on the type of refrigerator you have, these screws may be located on the inside or outside of the door.

Using the Phillips head screwdriver, remove the screws and set them aside. With the screws removed, you should be able to lift the handle away from the door. If the handle is stuck, you may need to use the flat-head screwdriver to gently pry it away.

Once the handle is removed, you can begin to install the new handle. Start by threading the new handle onto the screws. Depending on the type of refrigerator you have, the screws may be threaded from the inside or outside. Once the handle is securely in place, use the needle-nose pliers to tighten the screws. Be sure to not over-tighten the screws, as this may cause the handle to break again.

Once the screws are securely in place, you can test the new handle to ensure it is working properly. Open and close the door a few times to be sure that the handle is secure. If everything is working properly, you can plug the refrigerator back into the wall and you?re done!

Replacing a broken refrigerator door handle is a relatively simple process that can be done with a few basic tools. Before you begin, make sure to unplug the refrigerator and acquire the correct replacement parts. Once the old handle is removed, installing the new handle is as easy as threading it onto the screws and tightening them with a pair of needle-nose pliers. With a few simple steps, you can have your refrigerator door handle fixed and working properly in no time.

Leave a Reply

Your email address will not be published. Required fields are marked *