If you are having an old machine, then it is very likely that your machine is not working efficiently and it is going to consume too much energy. If your dryer has heating elements, then you need to check if your heating element is working or not.
If it is not working, then you can easily try to fix it by yourself. But if you want to save time and energy, then you can contact any of the best dryer repair companies.
Why do I need to repair my dryer?
Dryers are the most common appliances which are used in homes to dry wet clothes. It is very essential to have a good working dryer as it is responsible for making our life more comfortable.
The dryer heats the air in order to make the clothes dry quickly and efficiently. If your dryer is not working properly, then it will consume a lot of energy and will also damage the machine.
So, it is very essential to check the heating elements in your dryer and see if they are working or not.
What are the heating elements in a dryer?
The heating elements are made up of metal wires which are connected to the machine’s power source. The heating element will work when you turn on the machine and when you use the dryer, the heating element will heat the air inside the dryer.
Here is how to fix a heating element in a dryer
Here are the steps you need to follow to repair a heating element in a dryer:
1. Unplug the dryer from the outlet.
2. Open the door of the dryer.
3. Check whether the dryer is plugged into the outlet or not. If it is not plugged then check the electrical cord of the dryer and make sure that it is properly connected.
4. Now remove the heating element from the metal frame.
5. Clean the heating element with a cotton ball dipped in alcohol or vinegar.
6. After cleaning, connect the heating element to the metal frame using a screw driver or other tool.
7. Reassemble the dryer and plug it back into the outlet.
8. Turn on the dryer and check if it is working or not. If it is working fine then there is nothing to worry about. If it is not working, then you need to get the best dryer repair service.
FAQ
How can I tell if my dryer heating element is bad?
Dryers have heating elements which usually consist of a large coil of wire wrapped around a metal cylinder. The coils are covered by a plastic case that holds it in place and insulates it from moisture. If your dryer has a high-temperature problem, then it’s advisable to check the heating element.
How do you check the heating element in a dryer?
You can check it by unplugging the power and removing the drum. Check if the drum is warm to the touch, and inspect the wires for signs of overheating. If all is well, then the heating element is working fine, but if you notice any problem with it, then get it replaced immediately. You can also get your dryer checked out by an appliance repair company, which will charge you for the repair.
How much does it cost to replace a heating element in a dryer?
The cost to replace a heating element in a dryer is dependent on several factors, such as the type of heater, the brand, and the condition of your dryer. Some dryers are equipped with single or double heating elements. If you’re looking for replacement heating elements for a single heater, you can go for a 3-wire element, which costs around $25.
However, if you have a dual heater, you should opt for a 4-wire element, which costs about $100. If you want to replace the entire heater, you can go for a 5-wire element, which costs around $150-$250.
Conclusion
If you are still facing any issue with your dryer, then don’t waste time and go contact any of the best dryer repair companies.
They will provide you with a free estimate and will send their team of experts to repair your machine within a few hours. So, if your dryer is not working and it is making your life difficult then don’t waste time; just call them now.