How To Fix Steam Damage On Cabinets?

Posted on

How To Fix Steam Damage On Cabinets

Steam damage is a very common problem that most of us have faced. It is basically a kind of moisture that is trapped inside the wood. As wood is a porous material, moisture gets trapped in the material and this leads to the development of mould, mildew and fungi.

Once it is developed, the mould will spread throughout the entire house and the appearance of the house will be spoiled. In this post, I am going to share with you some tips and tricks that will help you to fix steam damage on cabinets.

Video Tutorial – Repair Water or Steam Damage on Wood Kitchen Cabinets

First step:

The first step of fixing the steam damage is to clean the affected area. Use warm water and a mild soap to clean the affected areas. Wash it at least twice.

Second step:

After cleaning the affected areas, use the cotton pad to absorb the moisture and then use the dryer. Put the affected areas under the dryer for 15 minutes.

Third step:

Now use the furniture polish or wax to protect the affected area from the moisture. Put the affected areas under the furniture for 15 minutes.

Fourth step:

Now use the deodoriser to get rid of the smell. Put the affected area under the deodoriser for 30 minutes.

Fifth step:

Now use the cleaner and polish to clean the affected area. Let it stay for 2 hours.


In conclusion, these are the steps that you need to follow to fix the steam damage. The steps are very simple and easy to follow. You just need to follow the above mentioned steps and you will get a great result.


What is steam damage?

Steam damage is when water vapor condenses and drips down the walls and gets trapped inside the wood. This causes the wood to swell and crack. The problem is that this damage is difficult to repair.

How can I tell if I have steam damage?

The first step is to check the ceiling for leaks. Look at the seams and edges of the ceiling. Also, look at the flooring. Look for cracks in the wood.

How can I fix steam damage?

If you notice that the wall has swollen, you can try to cut it off and replace it with drywall. If the wall is in good shape, then you can use caulk to fill the cracks. You may also need to use a grout to fill any gaps in the floor.

How long does it take to fix steam damage?

The repair process takes two to three weeks.

What is the best way to clean steam damage?

The best way to clean steam damage is to use a steam cleaner. It will remove the dirt and the moisture that is causing the damage.

Can I use a pressure washer to clean steam damage?

No, you cannot use a pressure washer. It’s not safe.

What is the difference between a wet/dry vacuum and a steam cleaner?

A wet/dry vacuum will suck up water and dirt. A steam cleaner is used to clean up the steam damage.

What else can I do to help speed up the repair process?

You can use a dehumidifier to help get rid of the moisture.

Leave a Reply

Your email address will not be published. Required fields are marked *