5 Steps to Fix a Whirlpool Refrigerator Not Cooling
If your Whirlpool refrigerator is not cooling, it can be a major inconvenience. Luckily, there are some simple steps you can take to diagnose and fix the problem. Here are the steps to help you get your refrigerator back up and running in no time.
Step 1: Check the Temperature
When a refrigerator isn’t cooling properly, the first thing you should do is check the temperature setting. Many modern refrigerators come with a digital display that allows you to adjust the temperature. The ideal temperature for a refrigerator is between 37 and 40 degrees Fahrenheit. If the temperature is set too low, the refrigerator will not be able to cool effectively. Also, make sure to check if the display is indicating a temperature at all; if it is blank, the refrigerator might not be receiving power.
Step 2: Check the Condenser Coils
The condenser coils are located on the back or bottom of your refrigerator and are responsible for dissipating heat. Over time, these coils can become clogged with dirt and dust, reducing their effectiveness. To clean them, unplug your refrigerator and use a vacuum cleaner with a brush attachment to remove any built-up dirt and debris.
Step 3: Check the Door Seal
If the door seal on your refrigerator is worn or damaged, it can allow cold air to escape, reducing the efficiency of the refrigerator. To check the door seal, close the door and pull out a dollar bill. Place the bill between the door and the frame of the refrigerator. If you can pull the bill out easily, the door seal needs to be replaced.
Step 4: Check the Evaporator Fan
The evaporator fan is responsible for circulating cold air throughout the refrigerator. If the fan is not working properly, the refrigerator will not cool effectively. To check the fan, unplug your refrigerator and locate the fan motor. If the motor is not running, you will need to replace it.
Step 5: Check the Compressor
The compressor is the heart of the refrigerator and is responsible for pumping refrigerant around the cooling system. If the compressor is not working, the refrigerator will not cool. To check the compressor, unplug your refrigerator and locate the compressor. If the compressor is not running, you will need to replace it.
These are the steps you can take to diagnose and fix a Whirlpool refrigerator not cooling. If all else fails, contact a professional repair service for assistance. With these steps, you should be able to get your refrigerator running again in no time.