How to Get a Mouse Out of a Stove

Posted on

If you have a mouse stuck in your stove, you may be tempted to take matters into your own hands. But this can be dangerous, and you might end up making things worse. Instead, let us show you how to get a mouse out of a stove.

And if you do find yourself having to use some unconventional methods, don’t worry. You won’t harm the mouse. Instead, you will likely just need to use some very simple tools and techniques to get the job done.

We will start by removing any wires that you may see attached to the mouse. Then, we will be using some simple tools to remove the mouse from the bottom of the stove.

See also  How to Take Off Stove Burners

Finally, we will be putting some adhesive tape on the bottom of the mouse. This will make it much easier for you to lift the mouse out of the stove. And once you are finished, you can dispose of the mouse in a safe manner.

Remove Any Wires Attached To Your Mouse

If there are wires attached to your mouse, you should first try to pull them away. This may help you get a better grip on the mouse, which should make the job a lot easier.

However, it is possible that the wires could be attached in such a way that you cannot easily move them. If this is the case, you should cut the wires as close to the mouse as possible.

See also  How many BTU Does A Gas Range Use?

You should then be able to remove the mouse by hand.

Use a Simple Tool To Remove the Mouse From the Bottom of the Stove

If you are lucky enough to have a hole in your stove’s bottom, you may be able to use a simple tool to remove the mouse from the stove.

This will typically consist of a small tube with a long handle on one end and a metal prong on the other. You will need to insert the prong into the hole in the bottom of the stove, and then pull on the handle to remove the mouse.

See also  How To Calibrate a Frigidaire Oven?

You can find these tools at most hardware stores.

Use Some Adhesive Tape To Make Lifting Mouse Out of Stove Easier

Once you have removed the mouse from the bottom of the stove, it may still be difficult to lift it out. This is because the mouse is likely stuck very securely to the stove’s bottom.

So, you will want to use some adhesive tape. This will make it much easier for you to lift the mouse out of the stove.

Apply the Adhesive Tape to the Bottom of Your Mouse

To apply the adhesive tape to the bottom of your mouse, start by holding it in your hand and lining up the edges of the tape with the edges of the mouse.

See also  How To Remove Burners From Electric Stove?

You should then pull the tape off of the roll and smooth down the tape until you have a thin, even layer on the bottom of the mouse.

You should then press the tape against the bottom of the stove. You should be able to use just a little bit of pressure to stick the tape to the bottom of the stove.

Remove the Tape Once Mouse Is Out of Stove

Once you have applied the tape, you will want to remove the tape once the mouse is out of the stove. This will ensure that you do not have any sticky tape on the mouse.

See also  GE xl44 Burner Igniter Replacement (How to Choose)

If you are using a pair of scissors, you can cut the tape close to the mouse, which will make it much easier to remove the tape once the mouse is out of the stove.

You should then dispose of the tape in a way that does not harm your mouse.

Leave a Reply

Your email address will not be published.