How to Install a Condenser Fan Motor

Posted on

How to Install a Condenser Fan Motor – The condenser fan motor is responsible for cooling down the air inside your room. You can’t just leave it anywhere without installation because it can damage your air conditioner. So, here I am going to tell you how to install a condenser fan motor.

The installation of the condenser fan motor is a simple procedure, but you need to take precautions as the motor can damage your air conditioner if not installed correctly. You need to follow the instructions properly, so you will not have any problems while installing the condenser fan motor.

Steps to install a condenser fan motor:

1. First, you need to disconnect the wires from the old motor and connect them to the new one.

2. After that, you need to tighten the screws of the old motor tightly, so you don’t have to loose it again.

3. The next step is to put the new motor on the frame and tighten the screws on the condenser fan.

See also  How to Clean Mold on Styrofoam in Air Conditioner

4. The last step is to install the switch of the condenser fan and plug it in.

The first thing that you need to do is to locate the condenser fan motor. You will need to disconnect the fan belt before you begin. There will be some loose wires coming from the condenser fan motor. You need to remove these wires carefully.

See also  How To Fix Window AC Compressor?

After removing all the wires, you need to disconnect the two ends of the condenser fan motor. Then you need to pull the condenser fan motor out of the housing. The next thing to do is to remove the bolts that hold the fan motor housing in place. Then, you need to install the new condenser fan motor in its place.

There are two screws that hold the motor in place. These screws need to be tightened in place. Once the motor is securely in place, you need to reconnect the two ends of the fan motor. Then, you need to tighten the bolts that hold the fan motor in place. Finally, you need to reattach the fan belt. After doing all these steps, you need to turn on the AC unit to test it to make sure that the AC works.

See also  How to Wire a Capacitor on an Air Conditioner?

Conclusion

So, these are the steps to install a condenser fan motor. You will get your work done in a single day if you follow the instructions properly. But, don’t forget to keep all the parts in the dust proof container.

See also  How To Clean a HAIER Window Air Conditioner?

Leave a Reply

Your email address will not be published.