How To Relight A Pilot Light On A Gas Dryer

Posted on

How to Safely Relight a Pilot Light on a Gas Dryer

Relighting a pilot light on a gas dryer is a relatively simple process. However, if done improperly, it can be dangerous. Before attempting to relight the pilot, be sure to read the manufacturer’s instructions and follow all safety precautions.

Step 1: Turn off the gas supply to the dryer. This can usually be done by turning off the gas valve at the wall.

Step 2: Locate the pilot light. This is typically a small flame located near the dryer’s burner.

Step 3: Clean the pilot light area. Remove any lint or debris that may have collected around the pilot.

Step 4: Remove the pilot light cover. This is usually a small metal plate that covers the pilot light.

Step 5: Turn on the gas supply and ignite the pilot light. To do this, locate the pilot light knob and turn it to the “on” position. Once the gas is flowing, use a match or lighter to light the pilot.

Step 6: Once the pilot is lit, turn the knob back to the “off” position. This will ensure the gas is only flowing when the pilot is lit.

Step 7: Replace the pilot light cover. This will help keep the area clean and free of debris.

If the pilot light will not stay lit, it may be due to a faulty part or an issue with the gas supply. In this case, it is best to contact a professional repairman to diagnose and repair the issue.

It is important to check the pilot light on a regular basis. This will help ensure that the dryer is operating safely and efficiently. If you are unable to light the pilot light or if it will not stay lit, contact a repairman as soon as possible.