Don’t Fear the Ice Maker: A Step-by-Step Guide to Removing an Ice Maker from a Kenmore Refrigerator
How To Remove An Ice Maker From A Kenmore Refrigerator
Removing an ice maker from a Kenmore refrigerator is not a difficult task and can be done with a few simple steps. This guide will help you understand how to remove an ice maker from a Kenmore refrigerator so you can make sure you have the necessary tools and know what to do when the time comes to remove the ice maker.
Tools You’ll Need
Before you start the process of removing an ice maker from your Kenmore refrigerator, you’ll need a few basic tools. First, you’ll need a Phillips head screwdriver. You’ll also need a flathead screwdriver and an adjustable wrench. Lastly, you’ll need a pair of needle nose pliers.
Step 1: Unplug the Refrigerator
Before you begin the process of removing an ice maker from a Kenmore refrigerator, you’ll want to make sure that the power to the refrigerator is shut off. To do this, simply unplug the refrigerator from the wall or shut off the power at the circuit breaker.
Step 2: Locate the Ice Maker
The ice maker is typically located in the upper right corner of the refrigerator. It should be easy to spot as it will be a rectangular box with a white plastic cover. Once you’ve located the ice maker, you can begin the process of removing it.
Step 3: Remove the Ice Maker Cover
Once you’ve located the ice maker, you can begin the process of removing the ice maker cover. To do this, use your Phillips head screwdriver to remove the screws that are holding the cover in place. Once the screws are removed, you can lift the cover off and set it aside.
Step 4: Disconnect the Water Line
At this point, you’ll need to disconnect the water line that is supplying water to the ice maker. To do this, use your adjustable wrench to loosen the connection that is securing the water line to the back of the refrigerator. Once the connection is loosened, you can pull the water line out of the refrigerator and move on to the next step.
Step 5: Disconnect the Wiring Harness
Once you’ve disconnected the water line, you’ll need to disconnect the wiring harness that is connecting the ice maker to the refrigerator. To do this, use your needle nose pliers to carefully pull the wiring harness out of its connector. Once the wiring harness is disconnected, you can move on to the next step.
Step 6: Remove the Ice Maker
Once the wiring harness and water line have been disconnected, you can begin the process of removing the ice maker from the refrigerator. To do this, use your flathead screwdriver to remove the screws that are securing the ice maker to the refrigerator. Once the screws are removed, you can carefully lift the ice maker out of the refrigerator and set it aside.
Step 7: Clean the Refrigerator
Once the ice maker has been removed, you’ll need to clean the area where the ice maker was located. To do this, use a soft cloth and some mild soap and water to wipe down the area. Once the area is clean and dry, you can move on to the next step.
Step 8: Reinstall the Cover
Now that the ice maker has been removed, you can begin the process of reinstalling the cover. To do this, use your Phillips head screwdriver to reattach the screws that were removed when you took off the cover. Once the screws are secured, you can replace the cover and your ice maker removal is complete.
Removing an ice maker from a Kenmore refrigerator is not a difficult task and can be completed with a few simple steps. By following the instructions in this guide, you can make sure you have the necessary tools and know what to do when the time comes to remove the ice maker.