How To Remove Door Handle From Ge Refrigerator

Posted on

A Step-by-Step Guide to Safely Remove a GE Refrigerator Door Handle

If your GE refrigerator door handle needs to be replaced or removed for any reason, it’s important to know how to safely do so. Removing a door handle from a refrigerator can be a bit tricky, but it’s not impossible. This guide will walk you through the steps to remove a GE refrigerator door handle.

Tools Needed

Before beginning, make sure you have the tools you need to safely remove the handle. You’ll need a Phillips screwdriver and a flathead screwdriver.

Step 1: Remove the Screws

The first step is to remove the screws that hold the handle in place. Depending on the model of your refrigerator, there may be two or three screws. Use the Phillips screwdriver to remove the screws.

Step 2: Remove the Handle

Once the screws are removed, carefully remove the handle. Do this gently as it may still be connected to the door.

Step 3: Disconnect the Wiring

If the handle is connected to wiring, you’ll need to disconnect it. Use the flathead screwdriver to carefully pry the wiring from the handle.

Step 4: Remove the Handle

Once the wiring is disconnected, you can finally remove the handle. Pull the handle away from the door with a gentle tug.

Step 5: Clean the Area

Once the handle is removed, use a damp rag to clean the area around the handle. This will help ensure a secure fit when you install the new handle.

Installing the New Handle

Once the area is clean, you can install the new handle. Start by connecting the wiring to the handle. Make sure it is securely connected. Once the wiring is connected, you can attach the handle to the door. Use the screws that came with the new handle to secure it in place.

Removing a door handle from a GE refrigerator is not a difficult task. Just make sure to use the right tools and be careful when handling the wiring. With a little patience and a few simple steps, you’ll be able to remove the handle and replace it with a new one.