Unclogging and Removing the Drum from an LG Front Load Washer – A Step-by-Step Guide
How To Remove Drum From Lg Front Load Washer
One of the most common maintenance issues with LG front load washers is removing the drum. This is because the drum can become clogged with lint, dirt, or other debris, making it difficult to spin. Fortunately, removing the drum is relatively easy and can be done with a few basic tools. In this article, we will discuss the steps necessary to remove the drum from an LG front load washer.
Before beginning, it is important to unplug the washer and turn off the water supply. This will help protect you from any potential electrical shocks. Once the power has been shut off, you can begin to disassemble the washer. The first step is to remove the top panel of the washer. This will give you access to the drum. To do this, use a Phillips head screwdriver to remove the screws that secure the top panel in place.
Once the top panel is removed, you will need to remove the screws that secure the drum. These screws are located on the backside of the washer. Again, use a Phillips head screwdriver to remove these screws. Once the screws have been removed, you can lift the drum out of the washer. Be careful, as the drum can be heavy.
Once the drum is out of the washer, you can begin to inspect it for any signs of damage or blockages. If there are any blockages, they can be cleared with a vacuum cleaner. Be sure to wear gloves when doing this, as the lint and other debris can be irritating to the skin. If the drum is damaged in any way, it should be replaced.
Once the drum is cleaned and inspected, you can begin to reassemble the washer. First, you will need to reinstall the drum back into the washer. To do this, line up the grooves on the drum with the grooves on the washer. Then, replace the screws that secure the drum in place. Finally, replace the top panel with the screws that were removed earlier.
Once the washer is reassembled, it is time to turn the power back on and reconnect the water supply. With these steps completed, the drum should now be securely in place in the washer.
Removing the drum from an LG front load washer is a relatively easy process. With the right tools and a bit of patience, you can complete this job quickly and safely. However, if you are ever in doubt, it is best to contact a professional for assistance.