How To Remove Otr Microwave

Posted on

A Step-by-Step Guide to Easily Remove Your Over-the-Range Microwave

How To Remove Otr Microwave

Are you looking for a way to remove an over-the-range microwave from the wall in your kitchen? Removing an over-the-range microwave is a relatively simple task that can be accomplished in a few steps without the help of a professional. This article will provide a detailed guide on how to remove an over-the-range microwave.

First, unplug the microwave from the wall. If the microwave is hard wired, turn off the power at the circuit breaker before proceeding. Next, remove the vent grille, if present. Make sure to have a bucket or container handy to catch any water that may drip out of the vent.

Once the vent grille is removed, locate the screws that secure the microwave to the wall. Most microwaves have two screws near the top, as well as two screws near the bottom. Remove the screws and set them aside.

Once the screws are removed, you can carefully slide the microwave away from the wall. You may need to use a putty knife or flat head screwdriver to loosen any debris that may be stuck to the wall. Be careful not to scratch the wall or the microwave.

Once the microwave is loose, you can carefully lift it off the wall. Have a helper available to assist you if needed. If the microwave is particularly heavy, you may want to use a dolly or furniture mover to help get it down safely.

Once the microwave is off the wall, you can take it outside to be cleaned. Make sure to wear gloves and a face mask to protect yourself from any dust or debris that may be present. Gently wipe down the exterior of the microwave with a damp cloth and a mild detergent.

When the microwave is clean, you can move it to its new location. If it is going in the same spot, you can proceed to reinstall it. Start by installing the two screws near the top at the same angle as before. Next, install the two screws near the bottom. Once the screws are tight, plug the microwave back in and turn on the power at the circuit breaker, if necessary.

Finally, reinstall the vent grille, if present. Make sure to secure it with the screws that were removed earlier. Now your over-the-range microwave is safely removed and ready to be used in its new location.

Removing an over-the-range microwave is a relatively easy process that can be done in a few steps. With a little bit of patience and the right tools, you can easily remove your microwave and reinstall it in its new location.

Leave a Reply

Your email address will not be published. Required fields are marked *