Removing a wall mounted microwave can be an intimidating task, but with the right tools and instructions it can be done safely and easily. There are a few steps involved in the process that need to be followed carefully, so it is important to make sure you have all the necessary components on hand. In this article, we will go over the best way to remove a wall mounted microwave from your kitchen or other area of your home.
Unplug the Microwave
Here are some tips on how to remove a wall mounted microwave with minimal risk of electric shock or damage:
First, turn off power to the circuit that supplies electricity to the unit from your circuit breaker box. To ensure safety throughout this process, use rubber gloves and protective eyewear as an extra precaution against contact with electrical components. Once the power has been turned off and you’re wearing appropriate safety gear, unscrew any screws that secure the microwave in place and gently pull outwards until it’s free from its mounting bracket. Then remove the microwave from the wall and lay it on the floor. Put a small bit of tape over one of the holes from the mounting bracket so that no metal parts can fall through. Next, turn off power to the circuit that supplies electricity to your entire home.
Securely Support the Microwave
When removing a wall mounted microwave, it’s important you have someone helping you for stability and safety. Before attempting any removal, ensure that the power source is turned off at the circuit breaker or fuse box. This will prevent any accidental electrical shock or damage should something come loose during the process. Once this is done, use an adjustable wrench or nut driver to loosen each of the four screws holding it in place so that it can be safely lowered away from the wall without putting any additional strain on its cords.
Remove Mounting Hardware and Brackets
Before you can take down your appliance, the first step is to remove any mounting hardware and brackets that are installed. With some basic tools and a few easy steps, anyone can safely remove their wall mounted microwave in no time.
Before beginning the process of removing your wall mounted microwave, make sure that all power sources to the unit have been disconnected. Next, carefully inspect the unit for any screws or nuts securing the mounting brackets or hardware to ensure they are all visible and accessible. You will then need to use an appropriate size screwdriver or wrench to loosen each fastener before being able to take out the appliance. Finally, slowly lower the appliance away from its mount and remove it using two people if necessary.
Detach Wiring and Vent Hose
Before attempting to remove the microwave, you must first detach all wiring and vent hoses from the unit. This step is important for safety purposes, as leaving the wiring connected can be dangerous due to hazardous electrical charges or gas connections still in place.
To begin this process, start by unplugging any cords that connect to a power source such as an outlet or fuse box. Then proceed by removing any screws that keep venting hoses securely attached to either side of the microwave unit itself. Once these attachments have been removed carefully pull away each hose until they are completely detached from both sides of the appliance. Finally make sure all remaining debris has been cleared away before proceeding with further steps of removal.
Lift Out the Microwave
To lift out the microwave unit, start by grasping hold of the appliance and pulling it away from the wall. Continue to pull until the unit is completely detached from both sides and then set it down on a flat surface.
Clean Up and Dispose of Remaining Parts
With the microwave oven unit removed, you will be able to access all of the remaining components and parts. This includes the screws, bolts and other small pieces that were previously hidden under it. Remove them all before disposing of the appliance.