How To Replace Built In Microwave?

Posted on

How to Replace Built-in Microwave in Your Home

Do you know that your microwave is not working fine? Is your microwave making too much noise while heating or is it giving you a burnt smell? Or maybe your microwave isn’t working properly at all?

If your microwave is not working fine then don’t worry because there are some easy ways to replace it. In this article, we will tell you some of the tips that will help you to replace the microwave.

Video Tutorial : Built-in Microwave Installation Inside Kitchen Cabinet


Replacing the front panel

The most common problem faced by the microwave is the front panel which is the part of the microwave that can be seen and is made up of glass. But the good thing is that you can easily replace the glass part of your microwave with an acrylic panel. You will get this acrylic panel in the local market and if you have to replace the microwave you can get it from the market.

See also  Microwave Makes Noise When Door Is Closed (Quick Guide)

Replacing the back panel

If you want to replace the back panel of your microwave then it is very important that you know the name of your microwave. If you don’t know the name then you can easily replace it. Just check if the microwave is made up of steel or aluminum.

Removing the door and the door frame

Now we will move on to the next part of our article and that is how to remove the door and the door frame. To remove the door you have to press the bottom of the microwave and then turn it upside down. Then you need to turn the microwave over so that the door is facing down and then you have to push it. And now the door frame will be removed from the microwave.

See also  How to Remove Wall Mounted Microwave?

Replacing the front panel with the new one

After removing the back and the door frame, you need to place the new acrylic panel in its place and then attach the screws. And that’s it! You have successfully replaced the front panel of your microwave.


So, these were some of the tips for replacing the built-in microwave in your home. But if your microwave is not working fine then don’t worry; there are many other ways to replace your microwave. So, just follow the above mentioned steps and replace the microwave with an acrylic panel and enjoy a working microwave.

See also  How To Change Light Bulb Inside Frigidaire Microwave


Why did I need to replace my microwave?

The first thing you should do when replacing your microwave is to turn off the power. Then, you need to make sure that the door is closed and the oven is empty. Then, you can open the door and turn the power back on.

How long does it take to replace a microwave?

It can take up to two hours to replace a microwave. You need to make sure that everything is disconnected before you begin.

See also  How Long Does It Take For a Microwave Capacitor to Discharge?

What’s the best way to remove the old microwave?

You should take out all of the screws from the inside of the microwave. Then, you can use a screwdriver to remove the bottom plate.

Is it safe to use an electric drill to remove the screws?

Yes, it is safe to use an electric drill to remove the screws.

Is it safe to remove the front panel?

Yes, it is safe to remove the front panel.

What do I need to do when I remove the front panel?

When you remove the front panel, you will see a fan and two light bulbs. You need to be careful with these parts, as they could be dangerous.

How do I get rid of the smell?

To get rid of the smell, you can use baking soda and water. You can also use a dehumidifier.

See also  How to Reset Panasonic Microwave?

How much does it cost to replace a microwave?

The average price to replace a microwave is $75-$100.

Leave a Reply

Your email address will not be published. Required fields are marked *