Get the Job Done Quickly: Replacing the Drain Pump on a Whirlpool Duet Washer
How To Replace Drain Pump On Whirlpool Duet Washer
The Whirlpool Duet Washer is a popular appliance that provides consumers with quality performance and convenience. It is a front-loading washing machine that is designed to handle larger loads of laundry in less time. Unfortunately, like all washers, the Whirlpool Duet Washer can experience problems with its drain pump. If the pump is not working correctly, it can cause the washer to be unable to drain the water from the tub. Luckily, replacing the drain pump is a relatively easy task that can be done at home with a few simple tools.
The first step in replacing the drain pump on a Whirlpool Duet Washer is to disconnect the power to the washer. This can be done by either unplugging the washer from the wall or by turning the circuit breaker off at the main electrical panel. It is important to ensure that the power is completely disconnected before attempting any repairs.
Once the power is disconnected, the next step is to remove the access panel located on the bottom of the washer. The access panel is held in place with a few screws, and it will need to be removed in order to access the drain pump. Once the access panel is removed, the drain pump can be seen and accessed.
The drain pump will be connected to the washer?s water lines, and these need to be disconnected before the pump can be removed. The water lines are usually secured with clamp ring connectors or hose clamps. It is important to take note of how the lines are connected before disconnecting them.
Once the water lines are disconnected, the drain pump can be removed from the washer. The pump is held in place with two screws and a few clips, and these need to be removed in order to remove the pump. Once the pump is removed, the new pump can be installed.
The new pump needs to be secured in place with the two screws and clips, and the water lines need to be reconnected. It is important to ensure that the water lines are connected correctly before turning the power back on to the washer.
Once the drain pump has been installed, the access panel can be replaced and the power can be turned back on. The washer should now be able to drain the water from the tub. If the washer is still not draining correctly, it is possible that there is a clog in the drain hose, which will need to be removed.
Replacing the drain pump on a Whirlpool Duet Washer is a relatively easy task that can be completed with a few simple tools. It is important to remember to disconnect the power to the washer before attempting any repairs and to take note of how the water lines are connected before disconnecting them. With a little time and effort, the pump can be replaced and the washer can be back up and running.