Guide to Replacing the Temperature Control Thermostat in Your Frigidaire Freezer
Replacing the temperature control thermostat in your Frigidaire freezer can be a fairly straight-forward task. This guide will walk you through the steps to ensure that you are able to successfully and safely replace the thermostat in your freezer.
What You’ll Need:
A new Frigidaire temperature control thermostat
A Phillips head screwdriver
A flathead screwdriver
Needle-nose pliers
Step 1: Unplug the Freezer
Before beginning any repair work on your freezer, make sure to unplug it from the wall outlet. This will prevent any shocks or injuries that could occur if the appliance were to be left plugged in while you are working on it.
Step 2: Remove the Control Panel
The Frigidaire temperature control thermostat is located behind the control panel. To access it, you will need to remove the panel. To do this, use a Phillips head screwdriver to loosen and remove the screws that secure the panel in place. Once the screws have been removed, carefully pull the panel away from the freezer.
Step 3: Locate the Thermostat
Once the control panel is removed, you should be able to see the temperature control thermostat located behind it. It will be a small, black box with several wires connected to it.
Step 4: Disconnect the Wires
Before removing the thermostat, you will need to disconnect the wires that are connected to it. To do this, use a flathead screwdriver to carefully loosen and remove the screws that secure the wires in place. Once the screws have been removed, carefully pull the wires away from the thermostat.
Step 5: Remove the Thermostat
Now that the wires have been disconnected, you can remove the thermostat from the freezer. To do this, use a pair of needle-nose pliers to carefully loosen and remove the screws that secure the thermostat in place. Once the screws have been removed, carefully pull the thermostat away from the freezer.
Step 6: Install the New Thermostat
Now that the old thermostat has been removed, you can install the new one. To do this, carefully place the new thermostat in the same position as the old one and use the screws to secure it in place.
Step 7: Reconnect the Wires
Once the new thermostat has been installed, you can reconnect the wires. To do this, use a flathead screwdriver to carefully tighten the screws that secure the wires in place.
Step 8: Reattach the Control Panel
Once the wires have been reconnected, you can reattach the control panel to the freezer. To do this, use a Phillips head screwdriver to tighten the screws that secure the panel in place.
Step 9: Test the Freezer
Now that the new thermostat has been installed, you can test the freezer to make sure it is working properly. Plug the freezer back into the wall outlet and adjust the thermostat to the desired temperature. Allow the freezer to run for a few hours and then check the temperature to make sure it is correct.
Conclusion
Replacing the temperature control thermostat in your Frigidaire freezer is a relatively simple task that can be completed with just a few tools and a bit of patience. Following this guide will help ensure that you are able to safely and successfully replace the thermostat in your freezer.