Replace Your Refrigerator Light Bulb Easily: A Step-by-Step Guide
It can be extremely frustrating if your refrigerator light bulb starts to burn out, especially if it happens during the middle of the night. Replacing the light bulb in your GE refrigerator is a relatively simple task that almost anyone can do. Here are some tips to help you replace the light bulb yourself.
Tools and Materials Needed
Before you begin, make sure you have the proper tools and materials. You will need a Phillips head screwdriver, a new light bulb, and a pair of needle-nose pliers. The new light bulb should be the same wattage as the old one, so be sure to check the wattage rating before purchasing a bulb.
Removing the Old Bulb
To begin, unplug the power cord from the wall outlet. Open the refrigerator door and locate the light socket. This will be located near the top of the refrigerator, usually behind a metal cover. Use the Phillips head screwdriver to remove the metal cover and set it aside.
Next, use the needle-nose pliers to remove the old light bulb. Make sure you are careful not to touch the glass bulb with your fingers, as this could cause the bulb to shatter and create a hazardous situation. Once the old bulb is out, discard it and prepare to install the new one.
Installing the New Bulb
Before you install the new bulb, make sure that the power cord is still unplugged. Carefully insert the new bulb into the light socket. Be sure to insert it firmly and straight, as this will ensure that it is properly connected and will not come loose.
Once the new bulb is in place, plug the power cord back into the wall outlet and turn the switch back on. The new bulb should now be lit up. If it is not, make sure you have inserted it correctly and that the power cord is plugged in.
Replacing the light bulb in your GE refrigerator is a simple task that can be done in just a few minutes. All you need is a Phillips head screwdriver, a new light bulb, and a pair of needle-nose pliers. Make sure you turn off the power before beginning and be careful not to touch the glass bulb with your fingers. Once the new bulb is in place, plug the power cord back in and turn the switch on. Your refrigerator should now be illuminated with a brand new light bulb.