How To Replace Ice Maker Auger Motor

Posted on

Troubleshooting Your Refrigerator: How to Replace Your Ice Maker Auger Motor

If your refrigerator’s ice maker isn’t functioning properly, the auger motor might be to blame. The auger motor helps to move the ice from the ice maker to the ice bin. If it has gone bad, you’ll need to replace the auger motor. Replacing the auger motor is not a difficult job, but it does require some basic knowledge of refrigerator repair. Here’s a step-by-step guide on how to replace your refrigerator’s ice maker auger motor:

Step 1: Unplug the Refrigerator

Before you begin any refrigerator repair job, it’s important to disconnect power to the appliance. Unplug the refrigerator’s power cord from the wall outlet and turn off the water supply valve.

Step 2: Remove the Ice Bin

The ice bin is the container located inside the refrigerator where the ice is stored. To access the auger motor, you’ll need to remove the ice bin. First, open the freezer door and locate the ice bin. Remove the ice bin by pulling it straight out toward you.

Step 3: Locate the Auger Motor

Once you’ve removed the ice bin, you’ll be able to access the auger motor. The auger motor is located at the back of the freezer, behind the ice maker. You may need to remove some other components to access the auger motor.

Step 4: Disconnect the Auger Motor

Before you can remove the auger motor, you’ll need to disconnect it from the other components. Locate the power supply and wiring harnesses connected to the motor and disconnect them.

Step 5: Remove the Auger Motor

Once you’ve disconnected the power supply and wiring harnesses, you can now remove the auger motor. The motor is held in place with two mounting screws. Remove the screws and then carefully pull the auger motor out.

Step 6: Install the New Auger Motor

Now that you’ve removed the old auger motor, you’ll need to install the new one. Insert the auger motor into place and then reinstall the mounting screws. Reconnect the power supply and wiring harnesses.

Step 7: Reinstall the Ice Bin

The last step is to reinstall the ice bin. Slide the ice bin back into place and make sure it is securely in place. Now you can turn the water and power back on and test the ice maker.

By following these steps, you should be able to replace your refrigerator’s ice maker auger motor with no trouble. If you need any additional help or have any questions, it’s best to contact a professional refrigerator repair technician.