Troubleshooting Your Frigidaire Refrigerator’s Ice Maker: A Step-by-Step Guide to Resetting and Replacing Parts
Frigidaire refrigerators are a popular appliance in todays kitchens. They come with a variety of features, including an ice maker. If your Frigidaire refrigerators ice maker isnt working properly, then you may need to reset it. Resetting a Frigidaire refrigerator ice maker is a fairly simple process that can be completed in a few easy steps.
Before beginning the reset process, make sure that the power to the refrigerator is turned off. Unplug the refrigerator from the wall outlet and then turn off the water supply to the refrigerator. This will prevent any potential water damage while you are resetting the ice maker.
Once the power and water have been disconnected, locate the ice maker reset button. This button is usually found on the side of the ice maker, near the back. Push the button and hold it for 10 seconds. This will reset the ice maker and the refrigerator should begin to produce ice again.
If resetting the ice maker does not solve the problem, then you may need to replace the ice maker assembly. To do this, you will need to remove the cover from the ice maker. This is usually done by removing the screws from the side of the ice maker. Once the cover is removed, you will be able to access the ice maker assembly.
Remove the old ice maker assembly and replace it with a new one. Install the new ice maker assembly according to the instructions provided with the new part. Once the new assembly is installed, you can reattach the cover and turn the power and water back on.
If the ice maker still isnt working properly, then you may need to replace the water inlet valve. The water inlet valve is responsible for supplying water to the ice maker. If the valve is not functioning properly, then the ice maker will not be able to produce ice. To replace the water inlet valve, you will need to access the back of the refrigerator.
Remove the screws from the back panel and then remove the panel. The water inlet valve will be located near the bottom of the refrigerator. Disconnect the water supply line from the valve and then remove the valve. Install the new valve and reconnect the water supply line. Reattach the back panel and turn the power and water back on.
Resetting a Frigidaire refrigerator ice maker is a fairly simple process that can be easily completed in just a few steps. If resetting the ice maker does not solve the problem, then you may need to replace the ice maker assembly or the water inlet valve. Either way, you should have your refrigerators ice maker working properly in no time.