Have you ever faced the problem where you had to do lots of research for resetting gas furnace? If yes then don’t worry as I will provide you the best tips for the same. I have also provided some tips to repair gas furnace in one article. So, I am going to give you some tips that will help you to reset the gas furnace.
How to reset gas furnace?
If you are the one who is facing the problem of resetting the gas furnace then it is time to reset your gas furnace. It means you have to make sure that all the parts of the gas furnace are working fine and you need to replace the fuse or circuit breaker if you have any problem with that.
Here is a video which will explain you the step by step process of resetting furnace:
Reset the thermostat
It is a simple tip but many people forget this. If you are facing the problem where the temperature is increasing continuously then reset the thermostat. You can also check the thermocouple wires to see whether they are working properly or not.
Check the furnace filter
If the furnace filter is full then there are chances that the air flow will be less. And the air flow plays an important role in cooling the furnace. So, make sure that the furnace filter is not full.
Check the gas valve
It is the main part of the gas furnace which is responsible for delivering the gas to the burner. If the valve is defective then there are chances that you won’t get any gas and it will lead to the problem of not heating up. So, make sure that the gas valve is working fine and if you have any problem with that then it will be best to reset the gas valve.
Clean the gas pipe
I think it is one of the easiest tips but many people forget this. Make sure that the gas pipe is clean and there are no obstructions which will prevent the gas flow. If you want to check the gas pipe then you can use a mirror or flashlight.
Check the pressure switch
If there is any kind of leakage or crack in the pressure switch then the furnace will not work properly. So, make sure that there is no crack or leakage in the pressure switch. You can use the pressure gauge to check the same.
Check the pilot light
The pilot light is the source of ignition and it will help in starting up the furnace. Make sure that the pilot light is working fine and if you have any problem with that then it is better to reset the furnace.
Conclusion
In conclusion, I hope you liked this article. It is very important to reset the gas furnace if there is any problem in heating the furnace. And if you want to know more about furnace repair then you can refer to my other article where I have shared some tips on how to repair gas furnace.