Resetting the Water Filter Light on a Kenmore Refrigerator: A Step-by-Step Guide
If you own a Kenmore refrigerator, you may have noticed a warning light that will indicate when its time to change the water filter. This is a great reminder to help you keep your water fresh and free of impurities. However, when it is time to change the filter, you may find that the light remains on. This can be a bit confusing and worrisome. Fortunately, resetting the water filter light on a Kenmore refrigerator is relatively simple and can be done in just a few steps.
Step 1: Replace the Water Filter
The first step is to replace the water filter on your Kenmore refrigerator. You will need to locate the filter, usually located inside the refrigerator on the upper right side. Unscrew the filter and remove it. Then, take your new filter and screw it into place. Make sure it is properly secured.
Step 2: Locate the Reset Button
Once the new filter has been installed, you can locate the reset button. This will usually be located on the bottom right side of the refrigerator. It may be hidden behind a small panel or door. When you open the panel, you should see the reset button.
Step 3: Press and Hold the Reset Button
Once you have located the reset button, press and hold it for five to ten seconds. This will reset the water filter light on the refrigerator. You should hear a clicking noise that indicates the light has been reset.
Step 4: Close the Panel
Once the reset button has been pressed and held for five to ten seconds, you may close the panel or door. The light should now be reset and you can enjoy fresh, filtered water from your Kenmore refrigerator.
If you have followed the steps above and the water filter light is still not resetting, you may need to check the filter itself. Make sure it is properly installed and securely fastened. If the filter is not properly installed, it can cause the light to remain on even after the reset button has been pressed.
Its important to keep track of when you need to change your refrigerators water filter. Not only will this help keep your water fresh and free of impurities, but it will also help ensure the light is reset properly. If you follow the steps above and the water filter light still remains on, contact a professional for assistance.