Resetting the Icemaker on a Whirlpool Refrigerator: A Step-by-Step Guide
Ice makers are an incredibly useful feature of many refrigerators. Not only do they make it easier to quickly get ice for drinks, but they also make sure that no one has to constantly fill up an ice tray and take up valuable freezer space. Unfortunately, ice makers can sometimes malfunction, leading to broken ice cubes or no ice at all. Fortunately, resetting the icemaker on a Whirlpool refrigerator is a fairly simple process that can help restore it to normal functioning.
Before attempting to reset the icemaker, its important to make sure the freezer temperature is set to 0°F or below. This is the optimal temperature for ice production, and making sure it is set correctly will help ensure that the icemaker works properly.
Once the temperature is adjusted, the next step is to locate the icemaker. On most Whirlpool refrigerators, the icemaker is located in the upper left corner of the freezer compartment. There should be a small switch labeled Test/Reset on the icemaker itself.
Gently press the Test/Reset button and hold it for a few seconds. This will cause the icemaker to run through a cycle of testing and resetting. When the cycle is finished, the icemaker should be reset and ready to start producing ice.
If the icemaker is still not functioning properly, the next step is to check the water supply. The icemaker requires a water line to produce ice, so if the line is clogged or broken, it wont be able to get the water it needs. To check the water line, locate the inlet valve located near the bottom of the refrigerator. Turn off the water supply and disconnect the water line from the valve. Check the line for any kinks or blockages, and make sure there is no damage.
Once the water line is checked, the next step is to check the ice tray. The ice tray should be completely empty and free of any ice cubes or other debris. If the tray is full, remove the ice and clean out any debris that may be blocking the tray.
Finally, if the icemaker is still not working correctly, the last step is to replace it. Refrigerator icemakers are typically fairly inexpensive and easy to replace. Before replacing the icemaker, however, its important to check the power supply. Make sure the refrigerator is plugged in and the power switch is in the on position.
Resetting the icemaker on a Whirlpool refrigerator is a fairly straightforward process. The most important thing to remember is to make sure the freezer temperature is set to 0°F or below, and to check the water line, ice tray, and power supply before attempting to reset the icemaker. If all else fails, replacing the icemaker may be the only option.