Get Your GE Washer Up and Running in No Time: A Step-by-Step Guide
How To Start Ge Washer
Are you looking to start a GE washer? If so, you?ve come to the right place. Starting a GE washer may seem like a daunting task, but with the right instructions and some patience, you can have your washer up and running in no time. Here?s a step-by-step guide on how to get your GE washer started.
Step 1: Plug in your washer
Before you can start your GE washer, you?ll need to plug it into a power outlet. Make sure to use a grounded three-prong outlet and that the outlet is voltage-rated for your washer.
Step 2: Install the water hoses
Next, you?ll need to connect the water hoses. Start by connecting the hot water hose to the left-hand side of the washer. Make sure the knob on the hose is turned all the way clockwise. Then, connect the cold water hose to the right-hand side of the washer. Again, make sure the knob on the hose is turned all the way clockwise.
Step 3: Level the washer
Now that the water hoses are installed, it?s time to level the washer. Use a carpenter?s level to make sure the washer is level from front to back and side to side. If the washer is not level, adjust the feet until it is.
Step 4: Add detergent and fabric softener
Once the washer is level, you can add detergent and fabric softener. Check the manufacturer?s instructions for the proper amount to use.
Step 5: Choose a cycle
Next, you?ll need to choose a cycle. GE washers have a variety of settings, so choose the one that is best for the type of load you?re washing.
Step 6: Press the start button
Once you?ve chosen a cycle, you?re ready to start the washer. Press the start button and the washer will begin to fill with water. Once the washer is full, it will begin to agitate the clothes and the cycle will begin.
Congratulations! You?ve now started your GE washer. Keep an eye on the washer during the cycle and make sure that the cycle is completed correctly. When the cycle is finished, unplug the washer and transfer the clothes to the dryer.
Starting a GE washer is a relatively easy task. Just follow the steps outlined above and you?ll be able to get your washer up and running in no time.