Silencing the Shakes: How to Stop Your Speed Queen Commercial Washer From Vibrating
From Vibrating
Speed Queen commercial washers are a popular choice for commercial laundering needs. However, one common problem with these washers is vibration during the spin cycle. The vibration is caused by an imbalance between the load and the washer. This can cause problems with the washers performance and can lead to costly repairs. Fortunately, there are several steps you can take to stop Speed Queen commercial washer from vibrating.
1. Adjust the Washers Level
The first step is to ensure that the washer is level. This can be done by using a level and adjusting the feet of the washer so that the bubble is in the center. If the washer is not level, it can cause the drum to be out of balance during the spin cycle, resulting in excessive vibration.
2. Check the Drum for Loose Objects
The next step is to check the drum for any loose objects. It is possible that coins, buttons, or other small objects have become lodged in the drum or between the drum and the cabinet, causing an imbalance. If any objects are found, they should be removed and the drum should be checked for any damage.
3. Check the Load Balance
Another possible cause of vibration is an unbalanced load. If the load is too large or too small, it can cause the drum to be off-balance during the spin cycle. To remedy this, the load should be redistributed to ensure that it is evenly balanced in the washer. This will help to reduce vibration and improve the washers performance.
4. Check the Suspension System
The suspension system of the washer is responsible for keeping the drum in balance during the spin cycle. If the suspension system is worn or damaged, it can cause the drum to become out of balance, resulting in excessive vibration. To check the suspension system, the washer should be inspected for any signs of wear or damage. If any damage is found, the suspension system should be replaced.
5. Check the Drive Belt
The drive belt is responsible for powering the drum during the spin cycle. If the drive belt is worn or damaged, it can cause the drum to become off-balance, resulting in vibration. To check the drive belt, the washer should be inspected for any signs of wear or damage. If any damage is found, the belt should be replaced.
By following these steps, you can help to stop Speed Queen commercial washer from vibrating. Adjusting the washers level, checking the drum for loose objects, checking the load balance, checking the suspension system, and checking the drive belt are all important steps in preventing the washer from vibrating. By taking these steps, you can ensure that your Speed Queen washer operates at its best and that you dont have to worry about costly repairs.