Unplug and Unscrew – A Step-by-Step Guide to Taking Apart Your Samsung Dryer
How To Take Apart A Samsung Dryer
Taking apart a Samsung dryer can be a daunting task for the novice or inexperienced. However, with the right tools and a bit of patience, you can easily disassemble your dryer to troubleshoot or repair any problems. This how-to guide will provide you with the steps necessary to take apart your Samsung dryer and get it back together in no time.
1. Unplug your dryer and move it away from the wall.
Before you begin taking apart your Samsung dryer, you will want to unplug it from the wall, and move it away from the wall to give yourself room to work.
2. Remove the back panel.
Start by removing the screws that hold the back panel of the dryer in place. The screws may be located at the top, bottom, and sides of the back panel. Once the screws are removed, you can remove the back panel, which will give you access to the inside of the dryer.
3. Remove the drum and belt.
The drum and belt are what actually turn the dryer, so they need to be removed in order to get to the other components inside the unit. To remove the drum and belt, you will need to loosen the tensioner pulley and remove the belt. Once the belt is removed, you can then lift out the drum.
4. Disconnect the wiring.
Once the drum and belt are removed, you can then disconnect the wiring from the dryer. The main wiring harness will be located near the top of the dryer, and you should be able to easily disconnect it with a screwdriver. You may also need to disconnect any additional wiring that is connected to the dryer, such as the wiring for the thermostat or timer.
5. Remove the blower wheel.
The blower wheel is responsible for pushing air through the dryer, so it needs to be removed in order to access the other components inside the unit. To remove the blower wheel, you will need to unscrew the screws that hold it in place, and then you can lift it out.
6. Remove the other components.
Once the blower wheel is removed, you will be able to access the other components inside the dryer, such as the heating element, thermostat, and timer. To remove these components, you will need to unscrew the screws that hold them in place, and then you can lift them out.
7. Reassemble the dryer.
Now that you have removed all of the components inside the dryer, it’s time to start reassembling the unit. To do this, you will want to start by reconnecting the wiring, and then re-install the blower wheel. After that, you can reinstall the drum and belt, and then you can re-attach the back panel.
Once the back panel is re-attached, you can plug the dryer back into the wall and move it back into its original position.
Taking apart a Samsung dryer might seem like a daunting task, but it’s actually quite simple. With a few basic tools and a bit of patience, you can easily take apart your dryer and get it back together in no time. Just remember to take your time and be careful when disassembling the dryer, and you should have no problem getting the job done.