Checking the Gas Oven Igniter: A Simple Step-by-Step Guide
How To Test Gas Oven Igniter
Gas ovens are a popular choice for cooking, as they provide even and consistent heat. However, they depend on an igniter to light the gas and produce the heat. If the igniter isn?t working properly, it can cause the oven to fail to light or produce heat. Testing the gas oven igniter is a simple process that can help you diagnose and repair the issue.
Before you begin, make sure you turn off the power to the oven. This is important for safety, as electricity and gas can be a dangerous combination.
1. Remove the oven racks and locate the igniter. It may be near the bottom of the oven, or it may be located behind the oven wall. If it?s behind the wall, you may need to remove a panel to access it.
2. Remove the igniter. You may need to use a screwdriver to remove the screws that hold the igniter in place.
3. Test the igniter. Using an ohmmeter, set it to the lowest setting and then place one probe on the igniter and the other probe on the ground. If the reading is between 0.5 and 2.5 ohms, then the igniter is working. If the reading is higher, then the igniter needs to be replaced.
4. Check the wiring. If the igniter is working, then you need to make sure that the wiring is connected properly. Remove the wires from the igniter and check them for any signs of damage. If the wires are damaged, replace them.
5. Reinstall the igniter. Once the wiring has been checked and replaced, if needed, you can reinstall the igniter in the oven. Make sure that the screws are tightened securely, and then replace the oven racks.
6. Turn the power back on. Once the igniter has been tested and reinstalled, turn the power back on and test the oven to make sure it?s working.
Testing the gas oven igniter can help you diagnose and repair a malfunctioning oven. Make sure to follow all safety precautions and use the right tools for the job. With a little patience and effort, you can have your oven working again in no time.