How to Unclog Ice Maker Water Line

Posted on

The ice maker in your fridge is a wonderful thing. But sometimes things get stuck in the water line that runs under the ice tray. This causes your ice to not form as it should. And when that happens, it can get very frustrating.

Luckily, there are ways to fix the problem without having to call a repairman. Here are three tips on how to unclog an ice maker’s water line.

But before we go any further, you can check out this quick video.

First, check to make sure the faucet that feeds the water line is working properly. Make sure that the faucet is closed, and that you have turned the water valve all the way down. If you have problems with the faucet, it might be time to replace it.

See also  How To Install Whirlpool Ice Maker?

If the faucet works fine, you will need to get a new part for the line. You can usually order this online, but if you cannot, you can also contact an appliance repair store. They should be able to order it for you.

If you are unable to find the part in a store, there are also online sites where you can buy them. But make sure that they are reputable.

See also  How To Put a Whirlpool Refrigerator in Defrost Mode?

There are some companies that sell cheap parts and then try to charge you for the expensive part. The next step is to get the new part.

You can usually do this by calling your local appliance repair store or going to a store that carries these parts. You might also be able to order it online, but again, make sure that it is a reliable company.

See also  Kenmore Refrigerator Ice Maker Reset

Once you have the part, you will need to install it. This might take some time, so be patient. And if you are having problems, ask for help. Now you should be good to go.

But if you are still having problems, you should contact an appliance repair shop. They might be able to help.

FAQ

What is the best way to fix a clogged ice maker water line?

The best way to fix a clogged ice maker water line is to remove the drain pan and then open the valve. Then turn off the water supply and remove the ice maker. If this doesn’t work, you can use a heat gun to melt the ice. After that, you can clean out the clog with a plunger or a pipe cleaner. Then reattach the ice maker and turn the water back on.

See also  How To Turn Off Whirlpool Ice Maker?

Do I need a plumber to fix a clogged ice maker water line?

Yes, if you want to save your time then you need a plumber to fix a clogged ice maker water line. If the water line is clogged, the ice maker will not work. A plumber will be able to remove the clog and fix the problem.

See also  Kitchen Aid Ice Maker Manual

What does a clogged ice maker water line look like?

A clogged ice maker water line will look similar to the picture below. The clog will be in the water line from the refrigerator to the ice maker.

What does a clogged ice maker water line look like

Leave a Reply

Your email address will not be published.