Kenmore Oven Control Board Replacement

Posted on

How to Change the Oven Controls?

Kenmore oven control board replacement – Nowadays, people are using microwave ovens to cook food in a short period of time. But if you are cooking something in the oven, you should be careful because sometimes the oven controls can be damaged by overloading.

If you are a home cook who is using a microwave oven for the first time, then you might not know how to change the oven controls. But the truth is that most of the microwaves come with the controls integrated in the oven.

See also  Magic Chef Wall Ovens - What You Need To Know

For example, in Kenmore models, the controls are located in the front of the oven. If you have such a model, then you will never have to worry about changing the oven controls.

However, if you have a different type of oven, then you will need to know how to change the oven controls. So, let’s talk about the steps that you will need to follow to replace the oven controls.

Remove the oven door

First, you will need to remove the oven door, as it is the first step. In most of the models, the oven controls are located on the inside of the oven door.

See also  Kenmore Oven Control Board Problem (Quick Guide)

Take the screws that are holding the door and pull it away. Now, you will need to remove the oven door, as it is the first step.

Disconnect the wiring

Next, you will need to disconnect the wiring. Make sure you don’t damage any of the wires and cut the wire that is connecting the oven control board and the oven.

If you have a different type of oven, then you will need to know how to change the oven controls. So, let’s talk about the steps that you will need to follow to replace the oven controls.

See also  Kenmore Water Filter Replacements

After removing the oven door, you will need to disconnect the wiring. Make sure you don’t damage any of the wires and cut the wire that is connecting the oven control board and the oven.

Open the oven door

Once you disconnected the wiring, it will be easy to open the oven door. You will need to lift the control panel and pull it out.

Finally, you will need to remove the oven door, as it is the first step. In most of the models, the oven controls are located on the inside of the oven door.

See also  How To Clean a Jenn Air Oven?

If you have a different type of oven, then you will need to know how to change the oven controls. So, let’s talk about the steps that you will need to follow to replace the oven controls.

Check the oven controls

You can check whether the oven controls are working properly. Turn on the oven and check if the lights turn on and the fan is running.

See also  How to Take Off Stove Burners

If the oven controls are not working, then you will need to replace them.

Conclusion

In conclusion, I hope you liked this post about “kenmore oven control board replacement”. If you have a different type of oven, then you will need to know how to change the oven controls.

Leave a Reply

Your email address will not be published. Required fields are marked *