Kenmore Washing Machine Troubleshooting

Posted on

If your kenmore washing machine is not working properly, you need to take it to a professional for repair. But before you do that, you need to learn how to fix the problem yourself.

Here are some of the most common problems that you might run into when using a kenmore washing machine.

You have the wrong detergent

If you have the wrong detergent, your clothes won’t get clean. You can fix this by taking the lid off the machine and checking the label on the inside. If you see “washing powder”, then you need to buy another one.

Your machine has stopped working

If the machine has stopped working, you need to check the manual. The manual will tell you how to reset the machine.

See also  Kenmore 80 Series Dryer Thermal Fuse (Quick Guide)

You are getting water in your clothes

This is usually caused by a clogged drain. To fix this, you need to turn the machine off, remove the lid, and remove the top of the machine. Once you have done that, you need to unplug the machine and turn it upside down. Then you need to run hot water through the drain until the water stops coming out of the drain.

There is a loud noise

If you hear a loud noise when you start the machine, you need to check the manual. It will tell you what to do if the noise continues.

See also  Washing Machine Leaking From Underneath

You have a broken or leaking motor

If you hear a loud noise, you need to turn the machine off immediately and take it back to the store. The noise could be caused by a broken motor or a bad connection. You can’t turn the machine on This is usually caused by a blocked drain. You need to remove the lid, remove the top of the machine, and unplug the machine. Once you have done that, you need to run hot water through the drain until the water stops coming out of the drain. If you still can’t turn the machine on, take it back to the store.

See also  How Do You Clean The Pump on a Whirlpool Washing Machine Top Loader?

You have a broken door

If your kenmore washing machine has a broken door, you need to remove the door and take it back to the store. This will require you to unscrew the screws holding the door on. There is a burning smell This is usually caused by a clogged drain. To fix this, you need to turn the machine off, remove the lid, and remove the top of the machine. Once you have done that, you need to unplug the machine and turn it upside down. Then you need to run hot water through the drain until the water stops coming out of the drain. If you still can’t turn the machine on, take it back to the store.

See also  LG Washing Machine Wont Turn On (Quick Fix)

There is a small amount of water in your clothes

If you see a small amount of water in your clothes, you probably have a leak somewhere. To fix this, you need to turn the machine off immediately and take it back to the store.

You are getting dirty water

If you are getting dirty water in your clothes, you need to turn the machine off immediately and take it back to the store.

See also  Kenmore Fridge Not Cooling But Freezer Working (Quick Guide)

The filter has likely become clogged, and while it might be possible to clean it, your clothes will get ruined if you leave the water running. TIP! Always use cold water in your washing machine. Hot water can ruin some fabrics.

Leave a Reply

Your email address will not be published.