Maytag Centennial Dryer Thermal Fuse (Things You Need To Know)

Posted on

Top 7 Things to Know About Maytag Centennial Dryer Thermal Fuse

When you buy a dryer, you want to be assured that it’s working properly. You’d be shocked to know that dryers have a high rate of failure. However, it is not just the dryer that you need to be worried about, but also its fuses. If your dryer’s thermal fuse burns out, the dryer won’t heat up and you’ll have to call an electrician. In this article, we’re going to take a closer look at the components of a dryer and talk about what you need to know about the thermal fuse.

Tutorial Video

YouTube player

What is the thermal fuse?

The thermal fuse is the component that allows your dryer to heat up. When the dryer detects that your clothes are dry, it automatically turns on. The dryer heats up the dryer’s elements, which heat up your clothes. When the thermal fuse is burned out, the dryer won’t heat up and you’ll have to call an electrician.

See also  Maytag Bravos Dryer Squealing (How to Fix)

Why is a thermal fuse important?

If the dryer’s thermal fuse burns out, you’ll notice that your dryer isn’t working. You’ll need to call an electrician to fix the issue.

How can you test a thermal fuse?

There are several ways to check whether your thermal fuse is functioning. If your dryer has a manual, you can open the door and turn on your dryer. Make sure that the power is on and that the motor is running. If the fuse blows when the dryer is turned on, you know that the fuse is bad.

See also  How to Fix a Dryer Timer?

Can you replace a thermal fuse?

If your dryer doesn’t have a manual, you’ll need to call an electrician. They can replace the fuse and make sure that the dryer heats up.

Conclusion

The thermal fuse is the most important part of your dryer. Make sure that you replace your dryer’s thermal fuse every time you get a new one. By following the tips above, you can avoid a trip to the dryer repair store.

FAQ

How can I tell if my maytag dryer thermal fuse has blown?

When the dryer thermal fuse blows, the heating element inside the dryer will heat up. The red and black wires are connected to the heating element, so when the fuse blows, they will both short.

See also  How To Fix A Noisy Dryer

How do I replace a maytag dryer thermal fuse?

The fuse will be underneath the dryer, so you will have to remove the dryer to get to it. There are two screws holding the dryer on. Unscrew these and then remove the dryer. Remove the old fuse by unscrewing the bottom screws. Disconnect the wires, and then replace the new fuse with the screws. Reattach the dryer, and you’re done!

See also  Kenmore 80 Series Dryer Thermal Fuse (Quick Guide)

Is it safe to use a blow dryer near a maytag dryer thermal fuse?

Yes, it is safe to use a blow dryer near a maytag dryer thermal fuse.

Are there any signs of a blown maytag dryer thermal fuse?

When the fuse blows, the heating element inside the dryer will heat up. The red and black wires are connected to the heating element, so when the fuse blows, they will both short.

Why does my dryer stop working?

It could be a number of reasons, but the most likely is that the fuse is bad. You can replace it yourself, or you can call a technician to replace it.

What should I do if I see a maytag dryer thermal fuse blowing?

If you see a maytag dryer thermal fuse blowing, turn off the power and call a technician immediately.

See also  Maytag Front Load Dryer Not Heating (Quick Fix)

How can I tell if a dryer needs repair?

If the dryer is not working, it could be a number of reasons. It could be a blown fuse, or the heating element might be defective.

What do I do if I hear a strange noise coming from the dryer?

The most likely cause is a defective heating element.

Leave a Reply

Your email address will not be published.