How to Fix Pressure Washer Leaking Water from Pump?
Pressure washers are useful tools for cleaning any place in the garden, house, etc. But the problem is that it is quite heavy and takes time to pump the water. But we all know that when we use the pressure washer, we usually leave the washer unsupervised and forget to turn the engine off. It happens to everyone, but it is not a good thing to do. When you forget to turn the engine off, it may happen that the water leaks out of the washer and the engine is flooded with water. In this situation, you need to take care of the water leakage immediately.
How to Fix Pressure Washer Leaking Water from Pump?
The first thing that you need to do is to find the water leak and stop it. Take a look at your washer and find the water leak. If it is the water line, then you need to replace it. If the leak is not on the water line, then you need to take some measures to stop the leak.
In the next step, you need to find the water level in your washer and try to raise it. You need to check if it is normal that the water level is so low. If it is, then you need to put some water in the tank.
You need to empty your tank completely. After that, you need to clean the filter. If it is full of mud and debris, then you need to change it.
If you have an extension cord, you can use it to plug the washer into a power outlet. It is the best way to turn the engine off.
Once the engine is off, you need to find the water leak and fix it. The water leak is usually at the water valve. You need to tighten it and make it tight. After that, you need to add some lubricant in the engine.
Conclusion
In conclusion, you need to check your water leak and then fix it. Make sure that you follow the above steps to avoid a water leak. If you have any further query regarding the pressure washer, you can ask us in the comment section below.