Samsung Front Load Washer Drain Pump

Posted on

How to Fix Front Load Washer Drain Pump Problem

Samsung Front Load Washer Drain Pump – Did you ever feel when you wash your clothes in a washing machine, then suddenly you realize that there is a problem and water starts overflowing in your sink? And you don’t know how to fix it?

It is a common problem faced by most of the people. There are different problems like the drain pump has stopped working or the drain pipe is blocked. The reason behind this problem is the lack of maintenance.

See also  How Long is a Rinse Cycle on a Washing Machine?

The drains in a washing machine are not exposed to the outside world. So, if you don’t clean them regularly then they will collect the dirt particles and eventually they will get clogged.

So, to avoid the problem, it is better to take your washing machine to a professional and get it repaired as soon as possible.

In this article, we will discuss about the different troubleshooting techniques of a front load washing machine drain pump.

See also  Washing Machine Leaking From Underneath

Troubleshooting technique:

1. Check the drain hose

First of all, you need to check the drain hose to see whether it is damaged or not. If the hose is damaged then it will lead to water overflow problem.

You can try to unplug the drain hose and connect the hose with a hose clamp. If it didn’t help, then you need to get it repaired as soon as possible.

See also  Trouble Shooting Kenmore Washer

2. Check the drainage port

The next thing is to check the drainage port. If it is blocked then you need to use a small piece of paper to make a hole.

If the paper has been stuck, then you need to take the top off and clean it. If the paper has come out, then you need to clean the outlet and make sure that the outlet is clear.

3. Check the power switch

If the drain pump is not working then it means that the power switch is switched on. In this case, you need to make sure that the power cord is plugged into the power socket.

See also  How To Open Locked Washing Machine Door

4. Change the water level

If you are facing a problem that the water is overflowing from the bottom of the machine, then it means that the water level is too low.

In this case, you need to change the water level. But you need to make sure that the water level is enough for the washing machine to work properly.

See also  Samsung Fridge Not Making Ice

Conclusion

In this article, we discussed about the different troubleshooting techniques of a front load washing machine drain pump. We have discussed all the important points. Hope you liked this article.

Leave a Reply

Your email address will not be published.